Get organized! This impeccably crafted cabinet is suitable for an office desktop, craft table, or the kitchen counter- to name a few ideas. It can also be easily hung on a wall with two 1/4" screws (provided) placed through the back and into your wall studs.
Materials
The case and drawer fronts are made of beautiful American black walnut. The drawer boxes are made of 1/2" baltic birch plywood and feature an inset blackboard. The metal, ball-bearing drawer slides are "push to open", so you simply press anywhere along the drawer front and the drawer springs out about 4"! The finish is high quality, low sheen, clear lacquer.
Construction Details
The case has been plate joined or "biscuited" and screwed. The screw holes are filled with 1/4" diameter Peruvian walnut face grain plugs. The "proud" vertical inside edges have been 30 degree beveled, then charred with a blowtorch. The drawers are constructed similarly to the case plus has grooves in the sides for twelve, 1/8" Baltic birch dividers that are included. The drawer fronts feature an inset blackboard measuring 1 1/4" x 4". You may notice that this is the same "cut-out" as the handle in our serving trays.
Measurements
It measures 15 5/8" tall, 12 1/4" wide, and 14 5/16" deep. The drawer interiors are 9" wide x 11 1/16" deep. The top drawer has an interior height of 2 1/8" and the bottom three are 3".
We can also custom make similar cabinets by request. Please feel free to call Tyler at 970-690-0503.
